** New 2 Inch Trackball Revision 2 by RetroArcade.us designed
specifically for the 60-IN-1 Jamma iCade mulitgame
board **
Product Information
The RetroArcade.us
Trackball is an "Arcade Quality" trackball and will work with your
Jamma 60-IN-1 boards. The device will be automatically configured
as soon as it is physically plugged into the Jamma board port.
This
is an excellent trackball for use with the 60-in-1 multigame units,
very smooth operation.
Technical Size:
Width: 2-13/16
Inches
Length: 2-13/16 Inches
Thickness: 1-3/8 Inches
Track
Ball Size: 2 Inch Diameter,
Harness included: Approximately 58 inches
Mounting
hardware sold separately
Notes: The connector
on this track ball is designed for the 60-IN-1 PCB board only, if
you are wiring to a 276-IN-1 or other Jamma board you will have to
remove the connector and manually wire to the board. Use the 276-IN-1
and Horizontal Jamma board wiring harness to perform this:
Click
Hear for additional wiring Harness
UPC: 740016535782
Arcade
Game Track Ball
Click
Here for wiring diagrams and manuals!
Jamma 60-in-1 PCB, iCade,
Arcade Multigame, Multicade board, JAMMA, Jamma PCB, Jamma 60-in-1,
60 in 1, Jamma Boards, 60 in 1 Arcade, 60 in 1 Jamma, Jamma Arcade,
iCade 60 in 1, iCade 60-in-1, Jamma Board,happ trackball,
happ 1 1/4, trackball, 2 inch trackball
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP),which is known to the State of California to cause cancer. for more information go to www.P65Warnings.ca.gov
