Crane
Machine Claw Coil for 24 to 48 volt (24 ohm) claws
-
Windings 2200
- Operating current 1.5 Amps.
- Diameter:
31mm > Height: 56mm (1.25 x 2.25 Inches)
Wiring
Notes:
This claw coil comes with four wires:Red, White, Blue
and Yellow.
1. The yellow and Blue get wired together
2. The Red and White get wired together
This make the two wire
connection needed for both 24 and 48 volt DC claw units.
The
strength of the claw is normally adjustable by the voltage from the
claw machine PCB board.
UPC Code: 670541219096
Jamma 60-in-1 PCB, iCade, Arcade
Multigame, Multicade board, JAMMA, Jamma PCB, Jamma 60-in-1, 60 in
1, Jamma Boards, 60 in 1 Arcade, 60 in 1 Jamma, Jamma Arcade, iCade
60 in 1, iCade 60-in-1, Jamma Board,
Classic Arcade Joystick,
Classic Red Ball Design, Jamma 60-in-1 PCB, Jamma 60-in-1, MAME Joystick,
Arcade Joystick