ENFORCER Security Voice Dialer by SECO-LARM

Automatically dials up to four telephone numbers and delivers up to two different messages when triggered by an alarm system.

Product Description

Features:

• Easily connects to an alarm panel and automatically dials out when activated
• Two independent voice messages. Stores up to four telephone numbers, cellular numbers or pager numbers
• Delivers a message of up to 16 seconds to each number stored
• Instant trigger or exit and entry delay settings
• Repeats the voice message for one minute per call
• Waits 8 to 10 rings before dialing the next programmed number
• Calls two times when there is no answer or three times when the line is busy
• EEPROM retains memory if power is lost for up to one year
• Optional 9-Volt internal battery provides stand-by power for approximately two to three days
• Can be used worldwide due to Universal Dial Tone
• Can be used with PBX and regular telephone systems
• 2 NO/NC trigger inputs
• Powered by alarm panel (Optional 12V adapter)
  
  

Specifications:

• Operating voltage:  12VDC
• Current Draw:  20mA (standby), 60mA (operate), 250mA (siren active)
• Trigger Inputs:   2 NO/NC Inputs
• Operating Temperature:   -4ºF~+122º F (-20ºC~+50º C)
• Backup Battery:   9VDC (not included)
• # of Tel. Numbers:   Up to 4
• Max. Digits per Tel. #:   32
• Case Material:   ABS Plastic
• Weight:   11-oz (320g)
• Dimensions:   57/8"x4"x11/2" (148x100x39 mm)

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP),which is known to the State of California to cause cancer. for more information go to www.P65Warnings.ca.gov